Skip to product information
1 of 9

RobDeezy

Element OverlandRack by RobDeezy

Element OverlandRack by RobDeezy

Regular price $1,145.00 USD
Regular price Sale price $1,145.00 USD
Sale Sold out
Shipping calculated at checkout.

Pack it all up on your OverlandRack and head out!

Increase the storage and hauling footprint of your Element with a full roof rack by RobDeezy. Modular design with horizontal crossbars mounted high or low; create individual baskets or a high-mount, flush surface. Comes with full 2-piece wind deflector as shown in the main image with two Elements (image courtesy of Veronica Ramos). Black powder-coated aluminum with all stainless-steel mounting hardware.

Installation uses the four OEM mouting points, with four additional feet that get bolted to the roof via Rivnuts. Drilling into roof and trim required, along with sealing the mounting locations for a water-tight seal. 

Flat-rate Continental U.S. shipping: $135.

*For off-road use only. Check local laws in your region for street use. There are no warranties or returns on RobDeezy products that have been installed.

This item typically drop-ships from our location in Vancouver, WA 98663. Crossbars typically ship direct to you from the manufacturer. 

This item can take up to 30 days to ship, depending on product availability. You will be advised if any item on your order will exceed the 30-day ship duration.

Ask about RobDeezy multiple-item order discounts and combined shipping discounts.

 

For Element OverlandRack installation instructions, click here.

Vehicle Year

2003-2011

Installation

Installation uses the four OEM mouting points, with four additional feet that get bolted to the roof via Rivnuts. Drilling into roof (outer sheetmetal only, not inner layer) and trim required, along with sealing the mounting locations for a water-tight seal.

Additional Information

This item can take up to 30 days to ship, depending on product availability. You will be advised if any item on your order will exceed the 30-day ship duration.

OverlandRack by RobDeezy - Questions and Answers
"I have been asked a number of common questions, hopefully this document can help answer some questions for you.
The following was a direct Q&A session via email with a potential customer.
Overall please keep in mind, I did this in 2017."

1. What's the approximate weight of the rack? - approx 45lbs, all aluminum with stainless hardware.

2. What's the approximate max load bearing? - I have it set at 720lbs static, if equally distributed. Doing a 90lb per cross bar average, with 8 bars. I have personally stood on 1 bar @ 200lbs.

3. Why the need for drilling? The Gobi and Adventure 311 racks only use the original mounts, so just wondering. - Gobi and 311 use OEM mounts, plus 4x additional no drill feet. My 4x additional feet are drilled and riv-nutted. I geared mine toward the original overland PrinsuRacks found on Toyotas, which use the drilled rivnuts. I didnt realize and didnt like that Gobi was a no drill. I trust things more bolted, especially when rolling around loaded up, so I decided to go that route.

4. I saw that you use a sealant for the mounts drilled into the roof. Have you had any issues with leaking or rust? - No leaking issues or rust that I've seen. I am working on an interior project and may pull the headliner and will take a peak. (As of 5.5.2020 – I still have not peaked).

5. Maybe I missed it, but what's the length & width of the rack? Current usable length at the top of the platform is 87". Width between side rails is 48.3". So overall platform dims are approx 87.5 x 48.3. Rack overall dimensions are approx 90" x 48.5". Basically windshield to a little past the sunroof.

6. Do all the OverlandRack have the cutout for the light bar in the front? Yes - all racks come with the wind deflector with light bar cutout. its actually a double cut out, both top and bottom. The top is just much smaller, but you can technically do a top led bar.

This is where we keep our "operator's manuals" for products we offer and our site. 

PRODUCT INSTRUCTIONS

How to install and adjust rear-seat floor-latch covers

How to install and adjust WRAPPED rear-seat floor-latch covers

# Passenger's-side work table installation instructions

# Rear hatch latch release installation instructions

# E-Jump Seat installation instructions

# E-Jump Seat Window Shelf installation instructions

# Plugs for rear seat latch covers

# Stainless-Steel Braided Brake Line installation information

# Window sticker installation instructions

RAIN DEAN PRODUCT INSTRUCTIONS

# 5D Eletent by Rain Dean installation instructions

# Basecamp Eletent by Rain Dean installation instructions

ROBDEEZY PRODUCT INSTRUCTIONS

 2003-11 Element OverlandRack installation instructions

 2003-11 Element RearSideWindowPanel installation instructions

 2003-11 Element TailgateStorage installation instructions

 2003-11 Element WindshieldTrimKit installation instructions

DIODE DYNAMICS PRODUCT WARRANTY/GUARANTEE INFO

 Complete warranty/guarantee info for Diode Dynamics products

HONDA ELEMENT HOW-TOs

# Exterior Windshield A-Pillar Plastic Trim Removal

# Exterior Windshield A-Pillar Plastic Trim Clip Detail and Trim Install

# Stainless-Steel Braided Brake Line installation information

SITE NAVIGATION

Get around our site by using the top text nav for main categories or the footer nav on the bottom left of each web page.
If you get lost, just hit the logo in the upper left to get you home.

# How to set up an account to view order history

# How to request a return or refund
 

E RIDES

"" Images of our customer’s Elements and our products

E-VENTS CALENDAR

"" Find Element-related gatherings, shows and driving events


CHARITY OF CHOICE

"" We continue (ElementDriven was formed in February 2021) to donate $1.50 from each set of our rear-seat floor-latch plates to the American Diabetes Association to help them in reducing the number of people diagnosed each year with diabetes — which is currently at 1.5 million. To learn more about the ADA click here.

 

ABOUT US

"" Learn a little about who we are

Shipping & Returns

ElementDriven offers a 30-day satisfaction guarantee on specific products, which is listed on the detail page for each product covered. Not all items will have this guarantee.

If you are not totally satisfied with the Honda Element Rear-Seat Floor-Latch Covers that you purchased, return it within 30 days of receiving it and we will refund what you paid to purchase it. This excludes original purchase shipping cost. We will refund you the full product amount you paid (minus shipping cost to you).

We want you to be satisfied with ElementDriven products.

To be eligible for a return, your item must be in undamaged condition. You’ll also need the receipt or proof of purchase (original order number).

- - -

Damages and issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. We want you to be happy with your ElementDriven product.

ElementDriven will replace the Honda Element Rear-Seat Floor-Latch Cover we shipped you if it has a manufacturing defect that is reported to us within 180 days of your receiving it. If you see a manufacturing defect in the Honda Element Rear-Seat Floor-Latch Cover that you purchased, complete the information belbow so that we can determine whether you are eligible for replacement.

Exceptions / non-returnable items

Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

THERE ARE NO WARRANTIES OTHER THAN THESE FOR THE HONDA ELEMENT REAR-SEAT FLOOR LATCH COVERS.

THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. OREGON LAW APPLIES TO THE WARRANTIES THAT ARE GIVEN AND TO THE EXCLUSION OF OTHER WARRANTIES.

We cannot accept returns on gift cards, or any items labeled as “non returnable” or “non-refundable item” at time of purchase.

View full details