Traffic Light Viewing Lens installation information
![](https://cdn.shopify.com/s/files/1/0541/3106/5031/files/LightInSight-slider_5e27a4da-79a1-46e8-a120-39dbb1c14756_1024x1024.jpg?v=1721586644)
This lens really helps keep your neck from getting strained and allows you to keep your head on the headrest when at hard-to-see traffic lights.
Installation is simple, and you can remove the lens and place wherever you'd like, any time you'd like:
-Clean the inside of the windshield in front of the driver, near the top of the windshield, or specific location you'd like to place the lens (not directly in front of the driver's view on the windshield) with a non-ammonia cleaner
-Wet the inside of the windshield lens location thoroughly with water. It's good to have a towel handy to catch excess water.
-Place smooth side of the traffic light viewing lens against the glass (text on the lens will be backwards from inside the vehicle) with the curved side down
-Do not install in the driver's normal field of view
-You can position the lens to where you'd like it with the water acting as a lubricant.
-Carefully push air bubbles to the edges of the lens
-The lens may appear cloudy until all the moisture has evaporated. It will turn clear in 6 to 24 hours
Enjoy the pain-free non-neck stretching usefulness of the Traffic Light Viewing Lens